Flush Canna

Mô tả chi tiết sản phẩm

Canna Flush gets rid of excess salts very effectively. In the event that your media has been overfertilized, using the Canna Flush will not cleanse it without destroying beneficial root organisms, as could happen with the use of reverse osmosis or demineralized water.

When used before harvesting, it cleans the plant of all excess salts, so the result is free of unwanted odors.

Instructions:
Removing excess nutrients from drainage substrates

• Soil mixtures - dilute Canna Flush at a ratio of 20 ml per 10 litres of water, apply in such a quantity that Canna Flush will flow reliably through the substrate, leave to work and finally pour through clean water. Then start fertilizing again according to your fertilizing schedule.
• Hydroponics (open systems) - dilute Canna Flush at a ratio of 40 ml per 10 l of water and apply on the last day of fertilisation in such a quantity that Canna Flush will flow reliably through the substrate, leave to work and finally pour clean water through. Then start fertilizing again according to your fertilizing schedule.
• Reuse inert substrates (e.g. expanded clay) - dilute Canna Flush at a ratio of 40 ml per 10 litres of water, allow to soak in and work for 24 hours, then rinse. Repeat the procedure if necessary.
• Pre-harvest (for annuals only) - Begin application 1 to 2 weeks prior to harvest once a week. Dilution is 2 ml/l for soil media, 4 ml/l for hydroponics. During harvest, continue according to your growing schedule.

Use:
Shake well before use. Store in a dark place and protect from frost. Keep out of reach of children.